SLiP2000™ Carbon Killer Coming Soon!
SLiP2000™ Carbon Cutter in changing to SLiP2000™ Carbon Killer. Along with the new name comes new packaging. All glass and metal containers are being replaced with durable plastic. These user friendly packages can also be used as storage containers.
Descripton
The time consuming and labor intensive chore of cleaning your pistols, automatic
and semi-automatic weapons is a thing of the past with Carbon Cutter.
SLIP 2000's™ Carbon Cutter was designed with your
health and safety in mind. Unlike other products, this product is
non-flammable, non-hazardous and it is biodegradable. Carbon Cutter
provides you with a safe effective way to clean
carbon, lead and plastic wad fouling.
Reusable
SLIP 2000's™ Carbon Cutter does not stop working and can be used again and again. If stored properly one jar will proived a user serveral cleanings and last several months.
Can be used on
All revolvers, pistols, 37mm and 40mm Gas Guns, automatic and semi-automatic weapons including: M-16, AR-15, MP-5, and all Machineguns like the AK-47 and 249-SAW.
Flash surpressers, silencers and cans
Dissolves burnt on carbon and will help flush powder and carbon residue out of all cans and suppressors.
Compensators
Dissolves burnt on carbon and will help flush powder and carbon residue off of your compensator.
Simple to use
Hang dirty parts with hangers provided in jar. Allow parts to soak in solution 2 to 15 minutes. Remove parts
from solution and wipe or rinse off carbon fouling. It's
that easy. Depending on the frequency of cleaning or type of ammo used a
second soaking may be required.
For larger parts that will not fit into jar, soak a nylon brush or rag
in Carbon Cutter, apply to area that needs to be cleaned and allow product to set
for 2 to 5 minutes. When ready to clean, saturate brush or rag with Carbon Cutter
again and wipe or brush away carbon. Parts may also be rinsed clean
under hot water.
After cleaning, always re-apply SLiP2000™ Lubricant to metal surfaces
and allow to penetrate pores of metal. SLiP2000™ will form a barrier and
help keep carbon, lead and plastic from sticking. Your next cleaning
will take half the time.
Other uses
Shotguns - Pistols - Revolvers - Black powder guns - Automatic weapons - Silencers - Flash Surpressers - Compensators
May be used in chambers and barrels as a bore cleaner. Apply to cylinder
faces, bolt faces and any other hard to clean areas and allow to soak
for 2 to 10 minutes. Carbon, lead, copper and burnt powder will wipe
clean with a nylon brush. Next cleaning will be much easier with SLIP
2000™ Lubricant/Cleaner. Users will actually be able to wipe carbon and
plastic wad fouling away.
For best results, on parts that are not cleaned on regular bases,
completely submerse parts to be cleaned and allow to soak for 5 to 15
minutes. Remove parts and wipe, brush or rinse clean.
Tech Data Sheet
Carbon Cutter Product Data Sheet PDF
Ordering
To order simply click on the link below or visit the ordering page for more information.
|
