RECOMMENDED FOR CASUAL SHOOTERS THAT SHOOT LESS THAN 1000 ROUNDS BETWEEN CLEANING
Specially Formulated Synthetic Lubricant
Gun Lube is truly an "ALL IN ONE" synthetic lubricant providing complete benefits of a Cleaner, Lubricant, and a Preservative and it is an excellent CLP.
Formulated especially for use on automatic rapid-fire and repetitive shooting firearms black powder, shotguns, rifles and pistols.
Slip 2000 Lubricant contains an exclusive metal treatment designed to control friction, which reduces heat, which eliminates excessive wear. It penetrates the micropores of the metal surfaces bonding itself to the metal allowing lubrication from within the metal itself.
DOES NOT Contain any Silicone, petroleum distillates, or PTFE (Teflon*) type ingredients and never gets sticky or tacky. Does not attract dust, dirt or grime like a petroleum product. (* Teflon is a registered trade name)
Its just like seasoning a frying pan, the more you use it, the less anything will stick!
Slip 2000 Gun Lubricant was designed and formulated with multiple uses and extreme high performance requirements and conditions in mind. Slip 2000 Gun Lubricant will out perform all other Lubricants in its class in sever weather conditions, high humidity, rain, sleet, and snow working from -85 deg. F to + 1250 deg F
Exceeds current MIL-SPEC-63460E
Slip 2000 Gun Lubricant has gone through many testing stages. One of the product guide lines that was followed was MIL SPEC 63460E for the US government. Slip 2000 Gun Lubricant has passed all test requirements set forth for this spec and exceeds many requirements.
|Flash Point COC
|2167 @ -40°C (cSt)
|Salt Spray Corrosion
|Four-Ball Wear Test
|Falex Pin & V-block
|No Seizure 750 lb.
Approved by Aberdeen Proving Grounds
Slip 2000 Gun Lubricant has passed and been approved for use in dusty environments (Iraq) on the M16 and smaller weapons by Aberdeen Proving Grounds. Additional testing still ongoing.
Independent Lab Testing Result
Slip 2000 Gun Lubricant exceeds the current specifications of Military Specification MIL-L-63460D. To view actual test results click on the Laboratory name below:
>> Superior Graphite Company (Not a lab)
Slip 2000 Gun Lubricant and its unique formulation penetrate into the smallest, tightest areas that oils do not go. This allows it to replenish the lubricant that has been lost during operation and provides a long lasting protective coating that reduces friction to a minimum and almost stops metal to metal wear. Slip 2000 Gun Lubricant forms a barrier that will then protect all parts and will allow them to work smoother and last longer.
Slip 2000 Gun Lubricant penetrates powder residue, carbon, copper, lead and plastic wad fouling. It will break the contaminants free and flush away trapped dirt, grit and grime. Slip 2000 Gun Lubricant will cut through built up carbon, copper and lead. What s left behind is a barrier that has bonded with the metal that will continue to lubricate and protect against corrosion. This film does not attract dust and it will also keep new firing residue from sticking again. After your first complete cleaning with Slip 2000 Lubricant you will see an amazing difference in the time and ease with which your next cleaning will take place.
Slip 2000 Gun Lubricant provides a long lasting barrier on all metal parts and does not attract dirt or other abrasive contaminants. Displaces moisture and prevents rusting. Proprietary formulation was developed to Clean / Lubricate / Protect and out last any other product on the market today! We have done this without adding any oils, petroleum distillates or harmful PTFE type ingredients. Slip 2000 Lubricant was developed with our health, safety and the environment in mind.
Apply Slip 2000 Gun Lubricant to all moving parts. Ejectors, chambers, actions, firing pins, bolts, hinge pins, receiver etc. Be sure to apply a coat in the barrels also using proper techniques. After you have used Slip 2000 Gun Lubricant to clean and lubricate all moving parts including the chokes in a shotgun, burned on carbon and plastic wad fouling is removed very easily with your normal cleaning.
Automatic and Semi-automatic weapons such as the M16 - AR15
Apply our Slip 2000 Gun Lubricant to all moving parts. Ejectors, chambers, actions, firing pins, bolt, magazine, receiver etc. Be sure to apply a coat in the barrels also using proper techniques.The same thing is true with revolver cylinders. Apply Slip 2000 Gun Lubricant to the face of the cylinder and a light coat in the chamber. After you have shot a few hundred rounds, just take a little Slip 2000 Gun Lubricant on a rag and wipe the carbon away. It is that simple. No more digging / scraping or fighting with special tools and expensive toxic cleaners! Slip 2000 Gun Lubricant makes clean up a breeze.